SBC's
While support for SBC's other than the Raspberry Pi is underway, currently the only officially supported devices are:
SBC | AIR | GND | Notes | recommended for |
---|---|---|---|---|
Raspberry Pi 2B+ | yes | no | ||
Raspberry Pi 3A | yes | no | 1 | |
Raspberry Pi 3A+ | yes | no | 1 | |
Raspberry Pi 3B | yes | yes | 2 | |
Raspberry Pi 3B+ | yes | yes | ||
Raspberry Pi 4B | yes | yes | Ground | |
Raspberry Pi Zero | no | no | 4 | |
Raspberry Pi Zero W | no | no | 4 | |
Raspberry Pi Zero 2 | yes | no | ||
Raspberry Pi Zero 2 W | yes | no | ||
Raspberry Pi Compute Module CM3+ | yes | yes | 3 | |
Raspberry Pi Compute Module CM4 | yes | yes | 3 | Ground |
Jetson Nano 2gb | yes | yes | Air | |
Jetson Nano 4gb | yes | yes | Air |
- it is not a good idea to use a Pi Zero or a Pi 3A(+) on the ground side, you may get it to work but the resource requirements (particularly GPU memory) on the ground are higher than they are on the air side.
- Will work but does not have internal dual band hotspot which will reduce functionality
- Requires a dt-blob.bin file for your carrier board when used as AIR to support dual cameras at the moment, ask for help in Telegram
- There is a small possibility that those boards are readded later in the developing phase with reduced features and significantly more latency